hanks8x_large.png

Preservative-Free Sheath Solution 8X Concentrate

Preservative-Free Sheath Solution 8X Concentrate

 
4 x 1 Liter Catalog No.  1020$71.00
Qty:

BioSure® Preservative-Free Sheath Solution 8X Concentrate contains no antibacterial/antifungal preservatives. It is ideal for use with cell sorters and systems requiring a preservative-free buffer. The product is for in vitro diagnostic use only.

You get four 1 liter bottles of 8X sterile concentrate. Each liter of sterile concentrate is reconstituted with 7 liters of high purity sterile water to yield 8 liters of sterile working solution. Total volume from one carton is 32 liters.

INTENDED USE

BioSure® Preservative-Free Sheath Solution 8X Concentrate is a buffered support/carrier reagent for transporting particles through a flow cytometer. This product contains no antibacterial/antifungal preservatives. BioSure® Preservative-Free Sheath Solution is designed for cell sorters and systems requiring a preservative-free buffer.

REAGENT COMPOSITION

(Upon reconstitution to 8 L)
Disodium EDTA 1.0 mM
Potassium Phosphate, Monobasic 1.9 mM
Potassium Chloride 3.8 mM
Sodium Phosphate, Dibasic 16.6 mM
Sodium Chloride 139.0 mM
Preservatives NONE

STORAGE AND STABILITY

Store at 15° - 30° C (59° - 86° F). DO NOT FREEZE. Product is stable until the date noted on the product and package labels.

WARNINGS AND PRECAUTIONS

As with all chemical solutions, avoid eye, skin and clothing contact with the concentrated or diluted reagent. No special precautions are recommended. See Material Safety Data Sheet for more detail.

As an 8X concentrate, the solution is clear, colorless and particulate free. Evidence of turbidity, sediment, discoloration or bacterial/fungal contamination requires that the reagent be discarded.

INSTRUMENTATION

This reagent was designed for use on current laboratory flow cytometers, cell sorters, and systems requiring preservative-free sheath solution.

DIRECTIONS FOR RECONSTITUTION AND USE

1. Measure the quantity of sheath solution needed into a container that will contain 8X the volume dispensed.

2. Measure 7X the volume dispensed of distilled or high purity water into the container and mix.

3. Reagent is ready for use.

4. When reagent bottle is empty, dispose of it responsibly by recycling.

CAUTION: Since no preservative is added to the sheath solution, bacterial contamination may occur.

  • Initial Standardization
  • Daily Monitoring
  • Sensitivity Assessment
  • Alignment & Linearity
  • Biological Safety Data
  • Material Safety Data Sheet

Material Safety Data Sheet

U. S. Department of Labor

May be used to comply with OSHAís Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements.
IDENTITY (As Used on Label and List)
BioSure® 8X Preservative Free Sheath Solution

Occupational Safety and Health Administration
(Non-Mandatory Form)
Form Approved
OMB No. 1218-0072

Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufacturer's Name

BioSure®, Inc.

Emergency Telephone Number

800-345-2267

Address (Number, Street, City, State, and Zip Code)

1050 Whispering Pines Lane, Suite F
Grass Valley, CA. 95945

Telephone Number for Information

800-345-2267

 

Date Prepared

September 30, 2014

 

Signature of Preparer (optional)

Section II - Hazardous Ingredients/Identity Information

BioSure® Sheath Buffer Solution PRESERVATIVE-FREE - 3.785 Liter Bottles

Hazardous Components
(Specific Chemical Identity:
Common Name(s))
OSHA PEL
ACGIH TLV
Other Limits Recommended
% (optional)
Disodium EDTA
(CAS No.: 6381-92-6)
Not Established
N/E
Potassium Phosphate, Monobasic
(Cas No.: 7778-77-0)
N/E
N/E
Potassium Chloride
(CAS No.: 7447-40-7)
N/E
N/E    
Sodium Phosphate, Dibasic
(CAS No.: 7558-79-4)

N/E N/E
Sodium Chloride
(CAS No.: 7647-14-5)
N/E
N/E
Water
90%

Section III - Physical/Chemical Characteristics

Boiling Point

N/E

Specific Gravity (1.050 - 1.065)

N/A

Vapor Pressure (mm Hg.)

N/E

Melting Point

N/E

Vapor Density (AIR = 1)

N/E

Evaporation Rate (Butyl Acetate = 1)

N/E

Solubility in Water

Completely

 

Appearance and Odor

Clear Colorless Solution

Section IV - Fire and Explosion Hazard Data

Flash Point (Method Used)

None

Flammable Limits

N/E

LEL

N/E

UEL

N/E

Extinguishing Media

N/A

 

 

 

Special Fire Fighting Procedures

N/A.

 

Unusual Fire and Explosion Hazards

None

 

Section V - Reactivity Data

Stability

Unstable

Conditions to Avoid
Stable
 

XX Very

 
Incompatibility (Materials to Avoid)

None Identified

Hazardous Decomposition or Byproducts

None Identified

Hazardous
Polymerization

May Occur

Conditions to Avoid

Will Not Occur

 
 
XX
 

Section VI - Health Hazard Data

Route(s) of Entry

Inhalation?

Skin?
Ingestion?

Irritation

Irritation
Large Quantities Irritation

Health Hazards (Acute and Chronic)

Irritation of upper respiratory tract or GI tract if inhaled or ingested.

Eye contact irritation.

Carcinogenicity

NTP?

IARC Monographs?
OSHA Regulated?
N/E

N/E

N/E
N/E

Signs and Symptoms of Exposure

N/E

Medical Conditions Generally Aggravated by Exposure

N/E

Emergency and First Aid Procedures

Flush skin or eyes with copious amounts of fresh water.

Section VII - Precautions for Safe Handling and Use

Steps to Be Taken in Case Material is Released or Spilled

Flush area with water.

Waste Disposal Method

Dispose in accordance with all applicable federal, state and local environmental regulations.

Precautions to Be Taken in Handling and Storing

Wear safety goggles, lab coat

Other Precautions

Section VIII - Control Measures

Respiratory Protection (Specify Type)

Ventilation
Local Exhaust
Special
Standard
Mechanical (General)
Other

Protective Gloves

Optional.

Eye Protection

Safety goggles or glasses.

Other Protective Clothing or Equipment

Lab coat

Work/Hygienic Practices

Follow standard/good laboratory practices.